So we're finally getting back to the bench. The projects that are for yourself are always second priority aren't they?
At the end of part three we had the right and left sides of the bench dry fit together. Now it's time for the front and back. Not much to see here. The front and back pieces were cut to size and the tenons were cut in the ends. A groove was cut into the front and side pieces to hold the bottom piece which will be made out of 1/2" MDF. The real perk this week is that the bench is starting to look like a bench!
 |
| Front, back and sides with tenons and a groove cut for the bottom. |
 |
| The Back |
 |
| The Front |
 |
| Here I added the templates I cut earlier to get a feel for how the curved pieces will look. |
No comments:
Post a Comment